Thin Air Press Bag 20x70"When you already have all the elements included in our Thin Air press kits, get multiples of this size bag for production work, as a replacement or addition to your other sizes. Useful for schools and groups and garage builders and woodworkers who require multiple bags so that more than one project can be made during the same gluing session.
A 20x70 vinyl vacuum bag with a seal and a one-way valve. The valve can be positioned in the center (for most wood projects) or off-set for wet resin (epoxy) pressings.
If you choose an "offset" valve for working with epoxy, you can also use your press with woodworking glues. The offset valve is simply to ensure epoxy does not go up the valve and clog it.
To be used with the breather netting and pump you already have.
|
FAQIs this reusable, and for how many times? The kits are designed to be used many many times. With a little care and maintenance, the TAP Kits will last for years. Will the glue stick to the bag? One board at a time. You are limited by how fast your glue dries. Once you start spreading water-based glue on the veneer sheets, you have about 7-10 minutes to get them pressed before the glue dries. Dry glue will not bond together. If the TAP Bag gets a hole in it, can I fix it? Do the valves leak? While many people assume air is leaking back through the valve, they are made of cast rubber and almost never leak. The most common problem with slow leakage is the open-end seal tape. If the seal is not properly closed up (check both sides) you will lose vacuum. If the top cap of the valve is not compromised with dust and debris, the valve will not leak. Do you refund my veneer if the pressing doesn't work? Sorry, we don't offer reimbursement in these cases. Whats a Dry Run and why should I do that? It means to press your project in the TAP bag, without putting any glue on the veneer sheets. Stack the dry sheets of veneer over the mold, seal them into the press with the breather netting in place, and pump the air out. Check for 10 minutes to make sure the TAP bag is not leaking. This will help you become familiar with the process before you commit glue to your veneer sheets. |
Thin Air Press Bag 20 x 70"
Product available with different options
€113.00
Tax included
A simple and effective way to press custom boards and woodworking projects.
Description
Product Details
Reviews
No reviews
Customer reviews
Reviews about this product
Show attestation
Reviews subject to control
1★
2★
3★
4★
5★
10/10
Based on 3
reviews
-
Top !
-
Top! (Translated review)
-
Effective (Translated review)
Customers who bought this product also bought:
€22.00
From €15.46 By 1000
Maple makes the strongest skateboards in the world!
€34.00
One set of Street Deck-shaped maple veneer 7-layer.
€25.00
From €22.00 By 2
High Density Foam for shaping your own custom Street Deck mold.
€32.00
Use this large roll to change the sealing tap of your TAP bags.
€70.00
A simple and effective way to press pre-shaped veneer sets.